Texas Instruments
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
UC2825BDW
Binêre Detail DataSheets

UC2825BDW

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: PWM Controller for Switching Power Supplies
  • Characteristics:
    • High-performance current mode PWM controller
    • Wide input voltage range
    • Adjustable frequency and duty cycle
    • Protection features such as overcurrent and overvoltage protection
  • Package: SOIC-16
  • Essence: UC2825BDW is a high-performance PWM controller used in switching power supplies to regulate the output voltage.
  • Packaging/Quantity: The UC2825BDW is typically sold in reels of 250 units.

Specifications

  • Input Voltage Range: 8V to 35V
  • Output Voltage Range: 0V to 30V
  • Frequency Range: 50kHz to 1MHz
  • Duty Cycle Range: 0% to 100%
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The UC2825BDW has 16 pins, which are assigned specific functions. Here is the detailed pin configuration:

  1. COMP: Compensation pin for feedback control loop
  2. CS: Current sense input pin for current sensing resistor
  3. RT/CT: External resistor/capacitor connection for setting oscillator frequency and soft-start time
  4. VREF: Reference voltage output for error amplifier
  5. GND: Ground reference for the IC
  6. FB: Feedback pin for regulating the output voltage
  7. VCC: Positive supply voltage input
  8. SYNC: Synchronization input for external clock signal
  9. OSC: Oscillator timing capacitor connection
  10. SS/TR: Soft-start/Shutdown pin for controlling startup and shutdown operations
  11. OUTA: Output A of the PWM controller
  12. OUTB: Output B of the PWM controller
  13. NC: No connection
  14. NC: No connection
  15. NC: No connection
  16. NC: No connection

Functional Features

  • Current mode control for improved stability and transient response
  • Adjustable frequency and duty cycle for flexible power supply design
  • Overcurrent protection to prevent damage to the power supply and load
  • Overvoltage protection to safeguard against voltage spikes
  • Soft-start function for gradual startup and reduced stress on components

Advantages and Disadvantages

Advantages: - High-performance PWM controller with wide input voltage range - Adjustable frequency and duty cycle for versatile power supply designs - Protection features ensure safe operation of the power supply and load - Soft-start function reduces stress on components during startup

Disadvantages: - Limited output voltage range (0V to 30V) - Requires external components for proper operation - Relatively high cost compared to some other PWM controllers in the market

Working Principles

The UC2825BDW operates based on the current mode control technique. It compares the feedback voltage from the output with a reference voltage and adjusts the duty cycle of the PWM signal accordingly. By regulating the duty cycle, the controller maintains a stable output voltage. The adjustable frequency allows for optimization of the power supply's performance.

Detailed Application Field Plans

The UC2825BDW is commonly used in various applications, including: - Switching power supplies for computers and servers - Industrial power supplies - LED lighting systems - Telecom equipment - Automotive electronics

Detailed and Complete Alternative Models

  • UC3825BDW: Similar to UC2825BDW but with extended temperature range (-40°C to +125°C)
  • UC3845BDW: PWM controller with integrated high-voltage startup circuitry
  • UC2845BDW: PWM controller with lower operating voltage range (4.5V to 35V)

These alternative models offer similar functionality and can be used as substitutes for the UC2825BDW in different applications.

Word count: 443 words

10 pirs û bersivên hevpar ên têkildarî sepana UC2825BDW di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of UC2825BDW in technical solutions:

  1. Q: What is UC2825BDW? A: UC2825BDW is a pulse width modulation (PWM) controller IC commonly used in power supply applications.

  2. Q: What is the purpose of UC2825BDW? A: The purpose of UC2825BDW is to regulate the output voltage of a power supply by controlling the duty cycle of the PWM signal.

  3. Q: What is the input voltage range for UC2825BDW? A: The input voltage range for UC2825BDW typically varies from 7V to 40V.

  4. Q: What is the maximum output current that UC2825BDW can handle? A: UC2825BDW can handle a maximum output current of around 1A, depending on the specific application and external components used.

  5. Q: How does UC2825BDW control the output voltage? A: UC2825BDW controls the output voltage by adjusting the duty cycle of the PWM signal, which in turn regulates the average output voltage.

  6. Q: Can UC2825BDW be used in both step-up and step-down power supply designs? A: Yes, UC2825BDW can be used in both step-up (boost) and step-down (buck) power supply designs.

  7. Q: What is the switching frequency range of UC2825BDW? A: The switching frequency range of UC2825BDW typically varies from a few hundred kilohertz to several megahertz.

  8. Q: Does UC2825BDW have built-in protection features? A: No, UC2825BDW does not have built-in protection features. External components need to be added for overcurrent, overvoltage, and other protections.

  9. Q: Can UC2825BDW operate in a wide temperature range? A: Yes, UC2825BDW is designed to operate in a wide temperature range, typically from -40°C to 85°C.

  10. Q: What are some typical applications of UC2825BDW? A: Some typical applications of UC2825BDW include power supplies for industrial equipment, motor drives, LED lighting, and battery chargers.

Please note that the answers provided here are general and may vary depending on the specific implementation and datasheet specifications of UC2825BDW.