Texas Instruments
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
UCC28633D
Binêre Detail DataSheets

UCC28633D

Product Overview

Category

UCC28633D belongs to the category of integrated circuits (ICs) specifically designed for power management applications.

Use

The UCC28633D is primarily used in power supply systems, where it provides control and regulation functions to ensure efficient power delivery.

Characteristics

  • Integrated circuit
  • Power management application-specific
  • Control and regulation functions
  • High efficiency

Package

UCC28633D comes in a compact and industry-standard package, making it suitable for various power supply designs.

Essence

The essence of UCC28633D lies in its ability to optimize power management, enabling efficient energy conversion and delivery.

Packaging/Quantity

UCC28633D is typically packaged in reels or tubes, with each reel/tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Input voltage range: 4.5V to 30V
  • Output voltage range: 0.8V to 24V
  • Maximum output current: 3A
  • Switching frequency: 100kHz to 1MHz
  • Operating temperature range: -40°C to 125°C

Detailed Pin Configuration

The UCC28633D has a total of 8 pins, each serving a specific function:

  1. VDD: Power supply input pin.
  2. GND: Ground reference pin.
  3. FB: Feedback pin for regulating the output voltage.
  4. COMP: Compensation pin for stability control.
  5. CS: Current sense pin for current monitoring.
  6. SS/TR: Soft-start and tracking pin for controlled startup.
  7. EN/UVLO: Enable and undervoltage lockout pin for system control.
  8. DRV: Gate driver output pin for driving external power switches.

Functional Features

  1. High Efficiency: UCC28633D incorporates advanced control algorithms and power management techniques to achieve high efficiency in power supply systems.
  2. Wide Input Voltage Range: The IC can operate within a wide input voltage range, making it suitable for various applications.
  3. Adjustable Output Voltage: The output voltage of UCC28633D can be easily adjusted within the specified range to meet specific system requirements.
  4. Protection Mechanisms: The IC includes built-in protection features such as overvoltage protection, overcurrent protection, and thermal shutdown, ensuring safe operation under different conditions.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption and improved energy savings.
  • Wide input voltage range allows for versatile application possibilities.
  • Adjustable output voltage provides flexibility in system design.
  • Built-in protection mechanisms enhance system reliability and safety.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • Requires careful consideration of external components for optimal performance.

Working Principles

The UCC28633D operates based on a pulse width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the switching waveform. By continuously monitoring the feedback signal and comparing it with a reference voltage, the IC dynamically adjusts the duty cycle to maintain the desired output voltage.

Detailed Application Field Plans

UCC28633D finds applications in various power supply systems, including but not limited to: - AC/DC converters - DC/DC converters - LED lighting systems - Industrial power supplies - Telecom power modules

Detailed and Complete Alternative Models

  1. UCC28633E: Similar to UCC28633D, but with extended temperature range (-40°C to 150°C).
  2. UCC28633F: Enhanced version with higher maximum output current (up to 5A).
  3. UCC28633G: Low-power variant with reduced standby power consumption.

These alternative models offer similar functionality to UCC28633D but may have specific features or specifications tailored for different application requirements.

Word count: 570 words

10 pirs û bersivên hevpar ên têkildarî sepana UCC28633D di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of UCC28633D in technical solutions:

  1. Q: What is UCC28633D? A: UCC28633D is a highly integrated, active power factor correction (PFC) controller designed for AC/DC power supplies.

  2. Q: What is the input voltage range supported by UCC28633D? A: UCC28633D supports an input voltage range from 85VAC to 265VAC.

  3. Q: What is the output power range that UCC28633D can handle? A: UCC28633D can handle output power ranging from a few watts up to several hundred watts.

  4. Q: Can UCC28633D operate in continuous conduction mode (CCM)? A: Yes, UCC28633D can operate in both continuous conduction mode (CCM) and discontinuous conduction mode (DCM).

  5. Q: Does UCC28633D have built-in protection features? A: Yes, UCC28633D includes various protection features such as overvoltage protection (OVP), overcurrent protection (OCP), and thermal shutdown.

  6. Q: What is the maximum switching frequency supported by UCC28633D? A: The maximum switching frequency supported by UCC28633D is typically around 150 kHz.

  7. Q: Can UCC28633D be used in flyback or buck-boost converter topologies? A: Yes, UCC28633D can be used in both flyback and buck-boost converter topologies.

  8. Q: Is UCC28633D compatible with synchronous rectification? A: Yes, UCC28633D is compatible with synchronous rectification, which helps improve overall efficiency.

  9. Q: Does UCC28633D have a power factor correction (PFC) function? A: Yes, UCC28633D is specifically designed for power factor correction (PFC) applications.

  10. Q: What are the typical applications of UCC28633D? A: UCC28633D is commonly used in AC/DC power supplies for various applications such as LED lighting, consumer electronics, and industrial equipment.

Please note that these answers are general and may vary depending on specific design requirements and application scenarios.