XC6118C25CGR-G
Product Overview
Category
XC6118C25CGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6118C25CGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The regulator consumes minimal power when no load is connected.
- Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.
- Short-circuit protection: It safeguards against short circuits, preventing damage to the circuitry.
Package
XC6118C25CGR-G is available in a compact surface-mount package.
Essence
The essence of XC6118C25CGR-G lies in its ability to provide reliable and stable voltage regulation for electronic circuits.
Packaging/Quantity
It is typically packaged in reels or tubes, with a quantity of several hundred units per package.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 2.5V
- Maximum output current: 150mA
- Dropout voltage: 200mV (typical)
- Quiescent current: 30μA (typical)
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6118C25CGR-G has three pins:
- VIN: Input voltage pin
- VOUT: Output voltage pin
- GND: Ground pin
Functional Features
- Voltage regulation: XC6118C25CGR-G maintains a constant output voltage regardless of variations in the input voltage.
- Low dropout voltage: It can operate with a small voltage difference between the input and output, ensuring efficient power usage.
- Low quiescent current: The regulator consumes minimal power when there is no load connected, reducing overall power consumption.
- Thermal shutdown protection: It automatically shuts down if the temperature exceeds a safe threshold, protecting the device from damage.
- Short-circuit protection: XC6118C25CGR-G safeguards against short circuits, preventing damage to the circuitry.
Advantages and Disadvantages
Advantages
- Stable voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short-circuit protection
Disadvantages
- Limited maximum output current (150mA)
Working Principles
XC6118C25CGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. By continuously monitoring and adjusting, it ensures a stable voltage supply to the connected components.
Detailed Application Field Plans
XC6118C25CGR-G finds applications in various electronic devices and systems, including: 1. Battery-powered devices: It regulates the voltage supplied by batteries, ensuring consistent performance. 2. Microcontrollers and digital circuits: It provides a stable power source for reliable operation. 3. Portable consumer electronics: It helps maintain a steady voltage supply to sensitive components like displays and processors. 4. Automotive electronics: XC6118C25CGR-G ensures stable voltage levels in automotive systems, preventing malfunctions.
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6118C25CGR-G are: 1. LM1117-2.5: A popular voltage regulator with a fixed 2.5V output. 2. MCP1700-2502E/TO: Another voltage regulator with a 2.5V fixed output voltage. 3. TS2937CZ-2.5: A low dropout voltage regulator with a fixed 2.5V output.
These alternative models can be considered based on specific requirements and availability.
Word count: 497 words
10 pirs û bersivên hevpar ên têkildarî sepana XC6118C25CGR-G di çareseriyên teknîkî de navnîş bikin
Sure! Here are 10 common questions and answers related to the application of XC6118C25CGR-G in technical solutions:
Q: What is XC6118C25CGR-G? A: XC6118C25CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C25CGR-G? A: The operating voltage range of XC6118C25CGR-G is typically from 0.9V to 6.0V.
Q: How does XC6118C25CGR-G help in technical solutions? A: XC6118C25CGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, DSPs, or other digital devices when the power supply voltage falls below a specified level, ensuring proper system initialization.
Q: What is the output type of XC6118C25CGR-G? A: XC6118C25CGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.
Q: What is the typical reset threshold voltage of XC6118C25CGR-G? A: The typical reset threshold voltage of XC6118C25CGR-G is 2.5V.
Q: Can XC6118C25CGR-G be used in battery-powered applications? A: Yes, XC6118C25CGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: Does XC6118C25CGR-G have any built-in delay for the reset signal? A: Yes, XC6118C25CGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6118C25CGR-G suitable for automotive applications? A: Yes, XC6118C25CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards and operates reliably in harsh environments.
Q: Can XC6118C25CGR-G be used in industrial control systems? A: Absolutely, XC6118C25CGR-G is commonly used in industrial control systems to ensure proper initialization and reliable operation of microcontrollers or other digital devices.
Q: What is the package type of XC6118C25CGR-G? A: XC6118C25CGR-G is available in a compact SOT-25 package, which is small and easy to integrate into various electronic designs.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.