XC6118C27CGR-G
Product Overview
Category
XC6118C27CGR-G belongs to the category of integrated circuits (ICs).
Use
This IC is commonly used in electronic devices for voltage regulation and power management.
Characteristics
- Voltage regulation capabilities
- Power management features
- Compact size
- Low power consumption
Package
XC6118C27CGR-G is available in a small form factor package, typically a 6-pin SOT-23 package.
Essence
The essence of XC6118C27CGR-G lies in its ability to regulate voltage efficiently and manage power consumption effectively.
Packaging/Quantity
This IC is usually packaged in reels or tubes, with a typical quantity of 3000 units per reel/tube.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 2.7V
- Output Current: Up to 100mA
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
- VIN: Input voltage pin
- GND: Ground pin
- EN: Enable pin
- NC: No connection
- VOUT: Output voltage pin
- NC: No connection
Functional Features
- Voltage regulation: The XC6118C27CGR-G ensures a stable output voltage of 2.7V regardless of input voltage fluctuations.
- Power management: This IC efficiently manages power consumption, reducing energy waste and extending battery life.
- Enable pin: The EN pin allows for easy control of the device's operation, enabling or disabling the voltage regulation function.
Advantages and Disadvantages
Advantages
- Compact size: The small form factor of XC6118C27CGR-G makes it suitable for space-constrained applications.
- Low power consumption: The IC's low quiescent current ensures minimal power loss during operation.
- Stable output voltage: It provides a consistent output voltage, ensuring reliable performance of connected devices.
Disadvantages
- Limited output current: The maximum output current of 100mA may not be sufficient for high-power applications.
- Narrow input voltage range: The input voltage range of 2.5V - 6.0V may limit compatibility with certain systems.
Working Principles
XC6118C27CGR-G utilizes internal circuitry to regulate the input voltage and provide a stable output voltage of 2.7V. It achieves this through a combination of feedback control and power management techniques. The enable pin allows for easy on/off control of the voltage regulation function.
Detailed Application Field Plans
XC6118C27CGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices
Detailed and Complete Alternative Models
- XC6118C27AGR-G: Similar to XC6118C27CGR-G, but available in a different package (SOT-89).
- XC6118C27DGR-G: A variant with a higher output current capability (up to 200mA).
- XC6118C27FGR-G: Offers a wider input voltage range (2.0V - 6.0V) compared to XC6118C27CGR-G.
These alternative models provide similar voltage regulation and power management functionalities, catering to different application requirements.
Word count: 446 words
10 pirs û bersivên hevpar ên têkildarî sepana XC6118C27CGR-G di çareseriyên teknîkî de navnîş bikin
Sure! Here are 10 common questions and answers related to the application of XC6118C27CGR-G in technical solutions:
Q: What is XC6118C27CGR-G? A: XC6118C27CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C27CGR-G? A: The operating voltage range of XC6118C27CGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C27CGR-G help in technical solutions? A: XC6118C27CGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level, ensuring proper system initialization.
Q: What is the output type of XC6118C27CGR-G? A: XC6118C27CGR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve different logic levels.
Q: What is the typical reset threshold voltage of XC6118C27CGR-G? A: The typical reset threshold voltage of XC6118C27CGR-G is 2.7V.
Q: Can XC6118C27CGR-G be used in battery-powered applications? A: Yes, XC6118C27CGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: Does XC6118C27CGR-G have any built-in delay for the reset signal? A: Yes, XC6118C27CGR-G has a built-in delay of typically 200ms to ensure stable power supply voltage before releasing the reset signal.
Q: What is the operating temperature range of XC6118C27CGR-G? A: The operating temperature range of XC6118C27CGR-G is typically between -40°C and +85°C.
Q: Can XC6118C27CGR-G be used in automotive applications? A: Yes, XC6118C27CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: Is XC6118C27CGR-G available in different package options? A: Yes, XC6118C27CGR-G is available in various package options, such as SOT-25 and USP-4B, providing flexibility for different design requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C27CGR-G.