XC6118C34BGR-G
Product Overview
Category
XC6118C34BGR-G belongs to the category of voltage regulators.
Use
It is commonly used as a power management solution in electronic devices.
Characteristics
- Voltage regulation capability
- Low dropout voltage
- High accuracy
- Thermal shutdown protection
- Overcurrent protection
Package
XC6118C34BGR-G is available in a small form factor package, typically SOT-23.
Essence
The essence of XC6118C34BGR-G lies in its ability to regulate and stabilize voltage levels within electronic circuits.
Packaging/Quantity
Typically, XC6118C34BGR-G is packaged in reels or tubes, with quantities varying based on customer requirements.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 3.4V
- Dropout Voltage: 200mV (typical)
- Output Current: 150mA (maximum)
- Quiescent Current: 40µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6118C34BGR-G has three pins:
- VIN (Input Voltage): Connects to the input voltage source.
- VOUT (Output Voltage): Connects to the output load.
- GND (Ground): Common reference point for the regulator.
Functional Features
- Voltage Regulation: Maintains a stable output voltage regardless of input voltage fluctuations.
- Low Dropout Voltage: Minimizes power loss across the regulator.
- Thermal Shutdown Protection: Prevents damage due to excessive temperature.
- Overcurrent Protection: Safeguards against excessive current flow.
Advantages and Disadvantages
Advantages
- High accuracy in voltage regulation
- Compact size for space-constrained applications
- Low quiescent current consumption
- Thermal and overcurrent protection enhance reliability
Disadvantages
- Limited output current capacity (150mA maximum)
- Restricted input voltage range (2.5V - 6.0V)
Working Principles
XC6118C34BGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. The regulator continuously monitors the input voltage, adjusting its internal components to ensure the desired output voltage is maintained.
Detailed Application Field Plans
XC6118C34BGR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C34BGR-G are: - LM1117-3.3 - MCP1700-3302E/TO - LP2985-33DBVR - AP2112K-3.3TRG1 - TPS73633DBVR
These alternatives offer similar voltage regulation capabilities and may vary in terms of package type, dropout voltage, and other specifications.
Word count: 320 words
10 pirs û bersivên hevpar ên têkildarî sepana XC6118C34BGR-G di çareseriyên teknîkî de navnîş bikin
Sure! Here are 10 common questions and answers related to the application of XC6118C34BGR-G in technical solutions:
Q: What is XC6118C34BGR-G? A: XC6118C34BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C34BGR-G? A: The operating voltage range of XC6118C34BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C34BGR-G help in technical solutions? A: XC6118C34BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a specified level.
Q: What is the typical reset voltage threshold of XC6118C34BGR-G? A: The typical reset voltage threshold of XC6118C34BGR-G is 3.4V.
Q: Can XC6118C34BGR-G be used in battery-powered applications? A: Yes, XC6118C34BGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: Does XC6118C34BGR-G have any built-in delay for the reset signal? A: Yes, XC6118C34BGR-G has a built-in delay of approximately 200ms to ensure stable power supply before releasing the reset signal.
Q: Is XC6118C34BGR-G suitable for automotive applications? A: Yes, XC6118C34BGR-G is suitable for automotive applications as it meets the necessary quality and reliability standards.
Q: Can XC6118C34BGR-G be used in industrial control systems? A: Absolutely, XC6118C34BGR-G can be used in industrial control systems to ensure proper reset functionality and system stability.
Q: What is the package type of XC6118C34BGR-G? A: XC6118C34BGR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.
Q: Where can I find more information about XC6118C34BGR-G? A: You can find more detailed information about XC6118C34BGR-G in the datasheet provided by the manufacturer or by contacting their technical support team.