XC6121A216ER-G belongs to the category of voltage regulators.
It is commonly used for regulating voltage in electronic circuits.
XC6121A216ER-G comes in a small surface-mount package.
The essence of XC6121A216ER-G is its ability to provide stable and regulated voltage output.
It is typically packaged in reels or tubes, with a quantity of 3000 units per reel.
XC6121A216ER-G has the following pin configuration:
XC6121A216ER-G operates by comparing the output voltage with a reference voltage. It adjusts the resistance within the regulator to maintain a constant output voltage, regardless of changes in the input voltage or load conditions.
XC6121A216ER-G is commonly used in various electronic devices, including:
Some alternative models to XC6121A216ER-G include:
These models offer similar specifications and functionality, providing options for different design requirements.
Word count: 346 words
Sure! Here are 10 common questions and answers related to the application of XC6121A216ER-G in technical solutions:
Q1: What is XC6121A216ER-G? A1: XC6121A216ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.
Q2: What is the operating voltage range of XC6121A216ER-G? A2: The operating voltage range of XC6121A216ER-G is from 0.8V to 6.0V.
Q3: What is the typical quiescent current consumption of XC6121A216ER-G? A3: The typical quiescent current consumption of XC6121A216ER-G is 1.0µA.
Q4: How does XC6121A216ER-G detect undervoltage conditions? A4: XC6121A216ER-G detects undervoltage conditions by comparing the input voltage with a fixed internal reference voltage. When the input voltage drops below the reference voltage, it triggers the output signal.
Q5: What is the output configuration of XC6121A216ER-G? A5: XC6121A216ER-G has an open-drain output configuration, which means it can be connected to an external pull-up resistor to achieve different output levels.
Q6: Can XC6121A216ER-G be used for overvoltage detection as well? A6: No, XC6121A216ER-G is specifically designed for undervoltage detection only. For overvoltage detection, a different voltage detector IC should be used.
Q7: What is the maximum voltage that XC6121A216ER-G can withstand on its input pin? A7: The maximum voltage that XC6121A216ER-G can withstand on its input pin is 10V.
Q8: Can XC6121A216ER-G be used in automotive applications? A8: Yes, XC6121A216ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q9: What is the temperature range within which XC6121A216ER-G can operate? A9: XC6121A216ER-G can operate within a temperature range of -40°C to +85°C.
Q10: Is XC6121A216ER-G available in different package options? A10: Yes, XC6121A216ER-G is available in a SOT-23-5 package, which is a small surface-mount package commonly used in electronic circuits.
Please note that these answers are based on general information and may vary depending on the specific datasheet and application requirements.