Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
XC6122C625MR-G

XC6122C625MR-G

Product Overview

Category

XC6122C625MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6122C625MR-G is available in a small surface mount package.

Essence

The essence of XC6122C625MR-G lies in its ability to regulate voltage effectively and efficiently.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.5V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122C625MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6122C625MR-G ensures a stable output voltage of 2.5V regardless of input voltage fluctuations.
  • Low dropout voltage: The regulator maintains a low dropout voltage of 200mV, minimizing power loss.
  • Low quiescent current: With a quiescent current of only 1μA, it consumes minimal power during standby mode.
  • Thermal shutdown protection: The device includes thermal shutdown protection to prevent overheating.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • High efficiency results in minimal power dissipation.
  • Wide operating temperature range enables reliable performance in various environments.

Disadvantages

  • Limited output current of 150mA may not be suitable for high-power applications.
  • Fixed output voltage may not be adjustable to meet specific requirements.

Working Principles

XC6122C625MR-G operates based on a voltage regulation principle. It uses internal circuitry to compare the input voltage with a reference voltage and adjusts the output voltage accordingly. By maintaining a stable output voltage, it ensures proper functioning of downstream components.

Detailed Application Field Plans

XC6122C625MR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6122C625MR-G include: - XC6206P252MR: Output voltage of 2.5V, maximum output current of 200mA - LM1117MPX-2.5/NOPB: Output voltage of 2.5V, maximum output current of 800mA - MCP1700T-2502E/TT: Output voltage of 2.5V, maximum output current of 250mA

These alternative models can be considered based on specific application requirements and desired specifications.

In conclusion, XC6122C625MR-G is a voltage regulator that provides stable and efficient voltage regulation. Its compact size, low power consumption, and wide operating temperature range make it suitable for various electronic applications. However, its limited output current and fixed output voltage should be taken into consideration when selecting the appropriate voltage regulator for a specific application.

10 pirs û bersivên hevpar ên têkildarî sepana XC6122C625MR-G di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of XC6122C625MR-G in technical solutions:

  1. Question: What is XC6122C625MR-G?
    - Answer: XC6122C625MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6122C625MR-G?
    - Answer: The operating voltage range of XC6122C625MR-G is from 0.9V to 6.0V.

  3. Question: How does XC6122C625MR-G work?
    - Answer: XC6122C625MR-G continuously monitors the input voltage and compares it with a fixed threshold voltage. When the input voltage drops below the threshold, an internal reset signal is generated.

  4. Question: What is the purpose of using XC6122C625MR-G in technical solutions?
    - Answer: XC6122C625MR-G is commonly used as a power supply monitoring device to ensure stable operation of microcontrollers, sensors, and other electronic components.

  5. Question: Can XC6122C625MR-G be used in battery-powered applications?
    - Answer: Yes, XC6122C625MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: Does XC6122C625MR-G have any built-in delay time?
    - Answer: Yes, XC6122C625MR-G has a built-in delay time of typically 200ms to prevent false triggering due to temporary voltage fluctuations.

  7. Question: What is the output configuration of XC6122C625MR-G?
    - Answer: XC6122C625MR-G has an open-drain output configuration, which allows it to be easily connected to other devices.

  8. Question: Can XC6122C625MR-G be used in automotive applications?
    - Answer: Yes, XC6122C625MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive reliability standards.

  9. Question: What is the temperature range of XC6122C625MR-G?
    - Answer: The operating temperature range of XC6122C625MR-G is from -40°C to +85°C.

  10. Question: Is XC6122C625MR-G available in different package options?
    - Answer: Yes, XC6122C625MR-G is available in various package options, including SOT-25 and USP-4B.

Please note that the answers provided here are general and may vary depending on the specific requirements and application scenarios.