Torex Semiconductor Ltd
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
XC6122D635MR-G
Binêre Detail DataSheets

XC6122D635MR-G

Product Overview

Category

XC6122D635MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6122D635MR-G is available in a small surface mount package.

Essence

The essence of XC6122D635MR-G lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 1μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122D635MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage regulation: XC6122D635MR-G ensures a stable output voltage of 3.3V regardless of input voltage fluctuations.
  • Low dropout voltage: The device operates with a low dropout voltage of only 200mV, minimizing power loss.
  • Low quiescent current: With a quiescent current of just 1μA, the regulator consumes minimal power during standby mode.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic devices.
  • Efficient voltage regulation ensures reliable performance of connected components.
  • Low power consumption extends battery life in portable applications.

Disadvantages

  • Limited output current of 150mA may not be suitable for high-power applications.
  • Narrow input voltage range restricts compatibility with certain systems.

Working Principles

XC6122D635MR-G utilizes a voltage reference and feedback control mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly to regulate the output voltage at the desired level.

Detailed Application Field Plans

XC6122D635MR-G finds application in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered equipment

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122D635MR-G are: - XC6206P332MR - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 311 words

10 pirs û bersivên hevpar ên têkildarî sepana XC6122D635MR-G di çareseriyên teknîkî de navnîş bikin

Sure! Here are 10 common questions and answers related to the application of XC6122D635MR-G in technical solutions:

  1. Question: What is XC6122D635MR-G?
    - Answer: XC6122D635MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6122D635MR-G?
    - Answer: The operating voltage range of XC6122D635MR-G is typically between 0.9V and 6.0V.

  3. Question: How does XC6122D635MR-G help in technical solutions?
    - Answer: XC6122D635MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper initialization and prevents data corruption.

  4. Question: What is the output type of XC6122D635MR-G?
    - Answer: XC6122D635MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6122D635MR-G?
    - Answer: The typical reset threshold voltage of XC6122D635MR-G is 3.6V.

  6. Question: Can XC6122D635MR-G be used in battery-powered applications?
    - Answer: Yes, XC6122D635MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0μA.

  7. Question: Does XC6122D635MR-G have a built-in delay circuit?
    - Answer: Yes, XC6122D635MR-G has a built-in delay circuit that ensures a stable reset signal is provided for a specified period after the power supply voltage rises above the threshold.

  8. Question: What is the typical delay time of XC6122D635MR-G?
    - Answer: The typical delay time of XC6122D635MR-G is 200ms.

  9. Question: Can XC6122D635MR-G be used in automotive applications?
    - Answer: Yes, XC6122D635MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 1 qualification standards.

  10. Question: Is XC6122D635MR-G available in different package options?
    - Answer: Yes, XC6122D635MR-G is available in a SOT-25 package, which is a small surface-mount package with three leads.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.