Toshiba Semiconductor and Storage
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
2SJ360(F)
Binêre Detail DataSheets

2SJ360(F) - Product Overview and Specifications

Introduction

The 2SJ360(F) is a semiconductor product belonging to the category of power MOSFETs. This device is widely used in various electronic applications due to its unique characteristics and functional features.

Basic Information Overview

  • Category: Power MOSFET
  • Use: Electronic circuitry, power control systems
  • Characteristics: High voltage capability, low on-resistance, fast switching speed
  • Package: TO-220AB
  • Essence: Power regulation and control
  • Packaging/Quantity: Typically packaged in reels or tubes, quantity varies based on manufacturer

Specifications

  • Voltage Rating: 600V
  • Current Rating: 5A
  • On-Resistance: 1.2Ω (max)
  • Gate Threshold Voltage: 2-4V
  • Operating Temperature Range: -55°C to 150°C
  • Mounting Type: Through Hole
  • Package / Case: TO-220AB

Detailed Pin Configuration

The 2SJ360(F) typically has three pins: 1. Gate (G): Input for controlling the flow of current 2. Drain (D): Output terminal for the current 3. Source (S): Common terminal

Functional Features

  • High voltage capability allows for use in various power applications
  • Low on-resistance minimizes power loss and heat generation
  • Fast switching speed enables efficient power control

Advantages and Disadvantages

Advantages

  • Suitable for high-power applications
  • Low power dissipation
  • Fast switching speed

Disadvantages

  • Sensitive to static electricity
  • Requires careful handling during installation

Working Principles

The 2SJ360(F) operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals.

Detailed Application Field Plans

The 2SJ360(F) finds extensive use in the following application fields: - Switching power supplies - Motor control systems - Audio amplifiers - LED lighting systems

Detailed and Complete Alternative Models

  • IRF540N
  • FQP30N06L
  • STP55NF06L
  • IRLZ44N

In conclusion, the 2SJ360(F) power MOSFET offers high voltage capability, low on-resistance, and fast switching speed, making it suitable for a wide range of power control applications.

Word count: 324

10 pirs û bersivên hevpar ên têkildarî sepana 2SJ360(F) di çareseriyên teknîkî de navnîş bikin

  1. What is 2SJ360(F) and what is its application?

    • 2SJ360(F) is a P-channel MOSFET transistor commonly used in electronic circuits for switching and amplification applications.

  2. What are the key specifications of 2SJ360(F)?

    • The key specifications of 2SJ360(F) include a maximum drain-source voltage of 60V, a continuous drain current of 3A, and a low on-resistance.

  3. How can 2SJ360(F) be used in power supply designs?

    • 2SJ360(F) can be used in power supply designs to control the flow of current and regulate voltage levels, especially in low-power applications.

  4. What are the typical operating conditions for 2SJ360(F)?

    • The typical operating conditions for 2SJ360(F) include a temperature range of -55°C to 150°C and a maximum power dissipation of 1.5W.

  5. Can 2SJ360(F) be used in audio amplifier circuits?

    • Yes, 2SJ360(F) can be used in audio amplifier circuits due to its ability to handle moderate power levels and its low on-resistance.

  6. What are the common circuit configurations for 2SJ360(F)?

    • Common circuit configurations for 2SJ360(F) include common source and source follower configurations, depending on the specific application requirements.

  7. Does 2SJ360(F) require any special heat management considerations?

    • While 2SJ360(F) has a relatively low power dissipation, it's important to consider heat sinking or thermal management in high-power applications to ensure optimal performance and reliability.

  8. Are there any recommended complementary components to use with 2SJ360(F)?

    • It's recommended to use appropriate gate driver circuits and protective components such as diodes and resistors to ensure safe and efficient operation of 2SJ360(F) in various applications.

  9. Can 2SJ360(F) be used in automotive electronics?

    • Yes, 2SJ360(F) can be used in automotive electronics for applications such as motor control, lighting systems, and power management due to its ruggedness and reliability.

  10. What are the typical failure modes of 2SJ360(F) and how can they be mitigated?

    • Typical failure modes of 2SJ360(F) include overcurrent, overvoltage, and thermal stress. These can be mitigated by implementing proper current and voltage protection circuits, as well as ensuring adequate thermal design and heat dissipation.