Toshiba Semiconductor and Storage
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
DF3A6.2FV,L3F
Binêre Detail DataSheets

DF3A6.2FV,L3F Product Overview

Introduction

The DF3A6.2FV,L3F is a versatile electronic component that belongs to the category of voltage regulators. This entry provides an in-depth overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: Regulating voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: SOT-23-5
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Available in reels of 3000 units

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 1.2V to 5.5V
  • Maximum Output Current: 300mA
  • Dropout Voltage: 150mV at 100mA
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The DF3A6.2FV,L3F has a standard SOT-23-5 package with the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. EN (Enable)

Functional Features

  • High Precision: Provides accurate and stable output voltage regulation
  • Low Dropout Voltage: Ensures efficient operation even with small voltage differentials
  • Thermal Shutdown Protection: Safeguards the device from overheating

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Compact SOT-23-5 package
  • Thermal protection for enhanced reliability

Disadvantages

  • Limited maximum output current (300mA)
  • Narrow input voltage range (2.5V to 6.5V)

Working Principles

The DF3A6.2FV,L3F operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a constant output voltage despite variations in the input voltage or load conditions. It utilizes a feedback mechanism to achieve precise regulation.

Detailed Application Field Plans

The DF3A6.2FV,L3F is suitable for various applications, including: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable technology - Industrial control systems

Detailed and Complete Alternative Models

  • DF3A5.0FV,L3F: Similar voltage regulator with a lower dropout voltage
  • DF3A6.5FV,L3F: Higher output voltage variant for specific applications
  • DF3A3.3FV,L3F: Lower output voltage variant for different requirements

In conclusion, the DF3A6.2FV,L3F is a reliable voltage regulator with precise regulation capabilities, compact packaging, and thermal protection features. Its application spans across various industries, making it a versatile choice for voltage regulation needs.

[Word Count: 443]

10 pirs û bersivên hevpar ên têkildarî sepana DF3A6.2FV,L3F di çareseriyên teknîkî de navnîş bikin

  1. What is DF3A6.2FV,L3F?

    • DF3A6.2FV,L3F is a specific type of component or device used in technical solutions, typically in electronic circuits or systems.

  2. What are the key features of DF3A6.2FV,L3F?

    • The key features of DF3A6.2FV,L3F may include its voltage rating, current capacity, frequency response, temperature range, and physical dimensions.

  3. How is DF3A6.2FV,L3F typically used in technical solutions?

    • DF3A6.2FV,L3F may be used for tasks such as voltage regulation, signal conditioning, power distribution, or protection against electrical surges.

  4. What are the common applications of DF3A6.2FV,L3F in technical solutions?

    • Common applications of DF3A6.2FV,L3F may include power supplies, battery management systems, motor control circuits, and audio amplifiers.

  5. What are the potential benefits of using DF3A6.2FV,L3F in technical solutions?

    • Benefits may include improved efficiency, enhanced reliability, better performance, and protection of sensitive components.

  6. Are there any limitations or considerations when using DF3A6.2FV,L3F in technical solutions?

    • Some considerations may include operating temperature limits, voltage/current ratings, compatibility with other components, and potential electromagnetic interference.

  7. How does DF3A6.2FV,L3F compare to alternative components in technical solutions?

    • DF3A6.2FV,L3F may offer advantages such as smaller size, higher efficiency, lower cost, or better performance in specific operating conditions compared to alternatives.

  8. What are the recommended best practices for integrating DF3A6.2FV,L3F into technical solutions?

    • Best practices may include proper heat dissipation, adequate electrical isolation, adherence to manufacturer's specifications, and thorough testing before deployment.

  9. Are there any industry standards or regulations that apply to the use of DF3A6.2FV,L3F in technical solutions?

    • Depending on the application, compliance with standards such as RoHS (Restriction of Hazardous Substances) or UL (Underwriters Laboratories) may be relevant.

  10. Where can I find reliable technical documentation and support for DF3A6.2FV,L3F?

    • Technical documentation and support can typically be obtained from the manufacturer's website, distributor resources, or community forums focused on electronics and engineering.