Vishay Semiconductor Diodes Division
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
GBU4JL-7002M3/45
Binêre Detail DataSheets

GBU4JL-7002M3/45

Product Overview

Category: Semiconductor
Use: Rectifier Diode
Characteristics: High voltage, high current capability
Package: TO-220AB
Essence: Efficient rectification of AC to DC
Packaging/Quantity: Bulk packaging, 50 pieces per pack

Specifications

  • Maximum Average Forward Current: 4A
  • Peak Repetitive Reverse Voltage: 1000V
  • Forward Voltage Drop: 1.1V
  • Reverse Leakage Current: 10uA
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The GBU4JL-7002M3/45 has a standard TO-220AB package with four pins. The pin configuration is as follows: 1. Pin 1: Anode 2. Pin 2: Cathode 3. Pin 3: Not connected 4. Pin 4: Anode

Functional Features

  • High surge current capability
  • Low forward voltage drop
  • High isolation voltage
  • Fast reverse recovery time

Advantages and Disadvantages

Advantages: - High voltage and current capability - Fast recovery time - Low forward voltage drop

Disadvantages: - Relatively large package size - Higher cost compared to standard diodes

Working Principles

The GBU4JL-7002M3/45 operates on the principle of rectification, converting alternating current (AC) to direct current (DC). When forward-biased, it allows current to flow in one direction, while blocking it in the reverse direction.

Detailed Application Field Plans

This rectifier diode is commonly used in power supplies, industrial equipment, and motor drives where efficient AC to DC conversion is required. It is also suitable for use in welding equipment and battery chargers.

Detailed and Complete Alternative Models

  • GBU4JL-7001M3/45
  • GBU4JL-7003M3/45
  • GBU4JL-7004M3/45

In summary, the GBU4JL-7002M3/45 is a high-voltage rectifier diode with excellent current capability and fast recovery time, making it suitable for various industrial and power supply applications.

Word Count: 270

10 pirs û bersivên hevpar ên têkildarî sepana GBU4JL-7002M3/45 di çareseriyên teknîkî de navnîş bikin

  1. What is the GBU4JL-7002M3/45?

    • The GBU4JL-7002M3/45 is a bridge rectifier diode module commonly used in technical solutions for converting alternating current (AC) to direct current (DC).

  2. What are the key specifications of the GBU4JL-7002M3/45?

    • The GBU4JL-7002M3/45 typically has a maximum average forward rectified output current of 4A, a maximum repetitive peak reverse voltage of 200V, and a maximum forward voltage drop of 1.1V.

  3. In what applications is the GBU4JL-7002M3/45 commonly used?

    • The GBU4JL-7002M3/45 is often used in power supplies, industrial automation, motor drives, and other electronic equipment requiring AC to DC conversion.

  4. What are the mounting options for the GBU4JL-7002M3/45?

    • The GBU4JL-7002M3/45 can be mounted using through-hole or surface mount techniques, providing flexibility for different design requirements.

  5. Does the GBU4JL-7002M3/45 require heat sinking?

    • Depending on the application and operating conditions, heat sinking may be necessary to ensure proper thermal management and reliability of the GBU4JL-7002M3/45.

  6. Are there any recommended operating temperature ranges for the GBU4JL-7002M3/45?

    • The GBU4JL-7002M3/45 typically operates within a temperature range of -40°C to 150°C, but specific operating conditions should be considered for each application.

  7. What are the typical failure modes of the GBU4JL-7002M3/45?

    • Common failure modes include overcurrent conditions, excessive temperature, and voltage transients, which can lead to degradation or permanent damage if not properly managed.

  8. Can the GBU4JL-7002M3/45 be used in high-frequency applications?

    • The GBU4JL-7002M3/45 is designed for standard frequency applications and may not be suitable for high-frequency operation due to its inherent characteristics.

  9. What safety certifications does the GBU4JL-7002M3/45 comply with?

    • The GBU4JL-7002M3/45 may comply with industry standards such as UL, CE, and RoHS, but it's important to verify the specific certifications required for the intended application.

  10. Where can I find detailed technical specifications and application notes for the GBU4JL-7002M3/45?

    • Detailed technical specifications and application notes for the GBU4JL-7002M3/45 can typically be found in the manufacturer's datasheet or application guides, which are available from the manufacturer's website or authorized distributors.