Vishay Semiconductor Diodes Division
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
GBU4ML-7001E3/51
Binêre Detail DataSheets

GBU4ML-7001E3/51

Product Overview

The GBU4ML-7001E3/51 belongs to the category of bridge rectifiers and is commonly used in power supply applications. It is characterized by its high efficiency, compact design, and reliable performance. The package typically includes the bridge rectifier itself along with essential documentation. The essence of this product lies in its ability to efficiently convert alternating current (AC) to direct current (DC), making it suitable for a wide range of electronic devices. The packaging usually consists of individual units, and the quantity may vary based on the supplier.

Specifications

  • Maximum Average Forward Current: 4A
  • Peak Repetitive Reverse Voltage: 100V to 1000V
  • Maximum RMS Voltage: 70V to 700V
  • Forward Voltage Drop: 1.1V
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The GBU4ML-7001E3/51 typically consists of four pins, with two pins designated for the input AC voltage and the other two for the output DC voltage. The pin configuration may vary slightly based on the manufacturer, and it is crucial to refer to the datasheet for accurate details.

Functional Features

  • Efficient conversion of AC to DC
  • Compact design for space-constrained applications
  • Reliable performance under varying load conditions
  • Low forward voltage drop for minimal power loss

Advantages and Disadvantages

Advantages

  • High efficiency
  • Compact size
  • Reliable performance
  • Low power loss

Disadvantages

  • Limited maximum average forward current
  • Operating temperature range constraints

Working Principles

The GBU4ML-7001E3/51 operates on the principle of rectification, where it converts the incoming AC voltage into a pulsating DC output. This is achieved through the use of diodes arranged in a bridge configuration, allowing for full-wave rectification.

Detailed Application Field Plans

The GBU4ML-7001E3/51 is commonly used in various power supply applications, including: - Consumer electronics - Industrial equipment - Automotive systems - LED lighting

Detailed and Complete Alternative Models

  • GBU4ML-6001E3/51
  • GBU4ML-8001E3/51
  • GBU6ML-7001E3/51
  • GBU8ML-7001E3/51

In conclusion, the GBU4ML-7001E3/51 bridge rectifier offers high efficiency and reliable performance, making it suitable for diverse power supply applications across different industries.

[Word Count: 345]

10 pirs û bersivên hevpar ên têkildarî sepana GBU4ML-7001E3/51 di çareseriyên teknîkî de navnîş bikin

  1. What is the GBU4ML-7001E3/51 used for in technical solutions?

    • The GBU4ML-7001E3/51 is a bridge rectifier diode commonly used in power supply and rectification circuits in technical solutions.

  2. What are the electrical specifications of the GBU4ML-7001E3/51?

    • The GBU4ML-7001E3/51 has a maximum repetitive peak reverse voltage of 1000V, an average forward current of 4A, and a maximum forward voltage drop of 1.1V at 4A.

  3. How does the GBU4ML-7001E3/51 contribute to circuit efficiency?

    • The GBU4ML-7001E3/51's low forward voltage drop helps minimize power loss and improve overall circuit efficiency.

  4. Can the GBU4ML-7001E3/51 handle high-frequency applications?

    • Yes, the GBU4ML-7001E3/51 is suitable for moderate frequency applications due to its fast recovery time and low leakage current.

  5. What are the typical applications of the GBU4ML-7001E3/51 in technical solutions?

    • The GBU4ML-7001E3/51 is commonly used in AC/DC power supplies, industrial automation equipment, motor drives, and general rectification circuits.

  6. Does the GBU4ML-7001E3/51 require additional heat sinking?

    • Depending on the application and operating conditions, the GBU4ML-7001E3/51 may require heat sinking to ensure proper thermal management.

  7. What are the mounting options for the GBU4ML-7001E3/51?

    • The GBU4ML-7001E3/51 is available in through-hole and surface mount packages, providing flexibility for different PCB layouts and assembly processes.

  8. Are there any recommended operating temperature ranges for the GBU4ML-7001E3/51?

    • The GBU4ML-7001E3/51 typically operates within a temperature range of -55°C to 150°C, but specific operating conditions should be considered for optimal performance.

  9. Can the GBU4ML-7001E3/51 be used in automotive applications?

    • Yes, the GBU4ML-7001E3/51 meets the requirements for many automotive applications, such as battery chargers and motor control systems.

  10. What are the key advantages of using the GBU4ML-7001E3/51 in technical solutions?

    • The GBU4ML-7001E3/51 offers high reliability, low power loss, and compact design, making it well-suited for various technical solutions requiring efficient rectification and power conversion.