Vishay Semiconductor Diodes Division
Dibe ku wêne temsîl be.
Ji bo hûrguliyên hilberê li taybetmendiyan binêre.
SS2H10-E3/52T
Binêre Detail DataSheets

SS2H10-E3/52T

Product Overview

Category: Schottky Diode
Use: Rectification, voltage clamping, and protection in various electronic circuits
Characteristics: High current capability, low forward voltage drop, fast switching speed
Package: SOD-123
Essence: Semiconductor diode
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Forward Voltage Drop: 0.45V at 1A
  • Reverse Voltage: 100V
  • Forward Current: 2A
  • Reverse Recovery Time: 5ns

Detailed Pin Configuration

The SS2H10-E3/52T has a standard SOD-123 package with two pins. The anode is connected to pin 1, and the cathode is connected to pin 2.

Functional Features

  • High current capability allows for use in power applications
  • Low forward voltage drop minimizes power loss
  • Fast switching speed enables efficient operation in high-frequency circuits

Advantages and Disadvantages

Advantages: - High current capability - Low forward voltage drop - Fast switching speed

Disadvantages: - Limited reverse voltage compared to other diode types - Higher cost compared to standard silicon diodes

Working Principles

The SS2H10-E3/52T operates based on the principles of Schottky barrier rectification. When a forward voltage is applied, the metal-semiconductor junction allows for rapid conduction, resulting in low forward voltage drop and fast switching speed.

Detailed Application Field Plans

This diode is suitable for a wide range of applications, including: - Power supply rectification - Voltage clamping in protection circuits - Switching power converters - Reverse polarity protection

Detailed and Complete Alternative Models

  • 1N5819: Similar characteristics and package
  • BAT54S: Dual diode in a different package
  • SB2100: Higher current capability and reverse voltage

In conclusion, the SS2H10-E3/52T Schottky diode offers high current capability, low forward voltage drop, and fast switching speed, making it suitable for various electronic circuit applications. While it has some limitations, its performance and characteristics make it a valuable component in many designs.

[Word Count: 344]

10 pirs û bersivên hevpar ên têkildarî sepana SS2H10-E3/52T di çareseriyên teknîkî de navnîş bikin

  1. What is the SS2H10-E3/52T?

    • The SS2H10-E3/52T is a Schottky diode designed for high-speed switching applications.

  2. What are the key features of the SS2H10-E3/52T?

    • The key features include low forward voltage drop, fast switching speed, and high current capability.

  3. What are the typical applications of the SS2H10-E3/52T?

    • Typical applications include power supply rectification, freewheeling diodes, and reverse polarity protection.

  4. What is the maximum forward voltage of the SS2H10-E3/52T?

    • The maximum forward voltage is typically around 0.55V at a forward current of 1A.

  5. What is the maximum reverse voltage of the SS2H10-E3/52T?

    • The maximum reverse voltage is typically around 40V.

  6. What is the operating temperature range of the SS2H10-E3/52T?

    • The operating temperature range is usually from -65°C to +125°C.

  7. Can the SS2H10-E3/52T be used in high-frequency applications?

    • Yes, the SS2H10-E3/52T is suitable for high-frequency applications due to its fast switching speed.

  8. Is the SS2H10-E3/52T RoHS compliant?

    • Yes, the SS2H10-E3/52T is RoHS compliant, making it suitable for use in environmentally friendly designs.

  9. What package type does the SS2H10-E3/52T come in?

    • The SS2H10-E3/52T is typically available in a surface mount SMB package.

  10. Are there any recommended layout considerations when using the SS2H10-E3/52T?

    • It is recommended to minimize the length of the PCB traces connected to the diode to reduce parasitic inductance and ensure optimal performance.