SI4860DY-T1-E3
Product Overview
- Category: Power MOSFET
- Use: Switching applications in power supplies, motor control, and other electronic devices
- Characteristics: High efficiency, low on-resistance, fast switching speed
- Package: SOIC-8
- Essence: Power management component for efficient energy conversion
- Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
- Voltage Rating: 30V
- Continuous Drain Current: 11A
- RDS(ON): 9.5mΩ
- Gate Threshold Voltage: 1.5V
- Total Gate Charge: 15nC
- Operating Temperature Range: -55°C to 150°C
Detailed Pin Configuration
- Pin 1: Source
- Pin 2: Gate
- Pin 3: Drain
- Pin 4: Not connected
- Pin 5: Not connected
- Pin 6: Drain
- Pin 7: Gate
- Pin 8: Source
Functional Features
- Fast switching speed for improved efficiency
- Low on-resistance minimizes power loss
- Enhanced thermal performance for reliability
Advantages and Disadvantages
- Advantages:
- High efficiency
- Low on-resistance
- Fast switching speed
- Disadvantages:
- Sensitive to static electricity
- Limited voltage rating
Working Principles
The SI4860DY-T1-E3 operates based on the principles of field-effect transistors, utilizing its gate voltage to control the flow of current between the drain and source terminals.
Detailed Application Field Plans
This MOSFET is suitable for a wide range of applications including: - DC-DC converters - Motor control circuits - Power management in portable electronics - LED lighting systems
Detailed and Complete Alternative Models
- SI4840DY-T1-E3: Similar specifications with lower RDS(ON)
- SI4890DY-T1-E3: Higher voltage rating with comparable on-resistance
Note: The above information is for reference purposes only. Always refer to the manufacturer's datasheet for accurate details.
Word Count: 306
10 pirs û bersivên hevpar ên têkildarî sepana SI4860DY-T1-E3 di çareseriyên teknîkî de navnîş bikin
What is the maximum operating voltage of SI4860DY-T1-E3?
- The maximum operating voltage of SI4860DY-T1-E3 is typically 30V.
What is the typical output current capability of SI4860DY-T1-E3?
- The typical output current capability of SI4860DY-T1-E3 is around 3A.
What is the typical on-resistance of SI4860DY-T1-E3?
- The typical on-resistance of SI4860DY-T1-E3 is approximately 20mΩ.
Can SI4860DY-T1-E3 be used for load switching applications?
- Yes, SI4860DY-T1-E3 is suitable for load switching applications due to its low on-resistance and high current capability.
What are the recommended input and output capacitance values for SI4860DY-T1-E3?
- The recommended input and output capacitance values for SI4860DY-T1-E3 are typically in the range of a few nanofarads to tens of nanofarads.
Is SI4860DY-T1-E3 suitable for battery management systems?
- Yes, SI4860DY-T1-E3 can be used in battery management systems due to its low on-resistance and high efficiency.
What is the thermal resistance of SI4860DY-T1-E3?
- The thermal resistance of SI4860DY-T1-E3 is typically around 40°C/W.
Can SI4860DY-T1-E3 be used in automotive applications?
- Yes, SI4860DY-T1-E3 is suitable for automotive applications, as it meets the necessary requirements for such environments.
What are the typical switching frequencies for SI4860DY-T1-E3?
- The typical switching frequencies for SI4860DY-T1-E3 range from a few hundred kilohertz to several megahertz.
Does SI4860DY-T1-E3 have built-in protection features?
- Yes, SI4860DY-T1-E3 includes built-in protection features such as overcurrent protection and thermal shutdown to ensure safe operation in various technical solutions.