SI8429DB-T1-E1
Product Overview
Category
The SI8429DB-T1-E1 belongs to the category of digital isolators.
Use
It is used for providing galvanic isolation and signal level shifting in various electronic circuits.
Characteristics
- Provides high-speed data transmission
- Offers high noise immunity
- Low power consumption
- Compact package size
Package
The SI8429DB-T1-E1 comes in a small outline package (SOP) with a specified pin configuration.
Essence
The essence of this product lies in its ability to provide reliable isolation and signal integrity in electronic systems.
Packaging/Quantity
The product is typically packaged in reels and is available in varying quantities based on customer requirements.
Specifications
- Isolation Voltage: 2.5 kV
- Data Rate: Up to 150 Mbps
- Operating Temperature Range: -40°C to 125°C
- Supply Voltage: 3.3 V
- Number of Channels: 4
Detailed Pin Configuration
The detailed pin configuration of the SI8429DB-T1-E1 is as follows: 1. Channel 1 Input 2. Channel 1 Output 3. Channel 2 Input 4. Channel 2 Output 5. Channel 3 Input 6. Channel 3 Output 7. Channel 4 Input 8. Channel 4 Output 9. GND 10. VCC
Functional Features
- High-speed data transmission
- Robust isolation barrier
- Bidirectional communication support
- Low power consumption
Advantages
- Enhanced signal integrity
- Reduced electromagnetic interference
- Compact form factor
- Wide operating temperature range
Disadvantages
- Higher cost compared to traditional optocouplers
- Limited number of channels per device
Working Principles
The SI8429DB-T1-E1 utilizes capacitive coupling and proprietary isolation techniques to transmit digital signals across the isolation barrier while maintaining signal integrity and protecting the connected circuitry from voltage transients and noise.
Detailed Application Field Plans
The SI8429DB-T1-E1 finds applications in: - Industrial automation - Power inverters - Motor drives - Battery management systems - Communication interfaces
Detailed and Complete Alternative Models
Some alternative models to the SI8429DB-T1-E1 include: - ADuM1401 - ISO7741 - MAX14937
In conclusion, the SI8429DB-T1-E1 digital isolator offers high-speed and reliable isolation for various electronic applications, making it an essential component in modern electronic designs.
Word Count: 366
10 pirs û bersivên hevpar ên têkildarî sepana SI8429DB-T1-E1 di çareseriyên teknîkî de navnîş bikin
What is the maximum input voltage for SI8429DB-T1-E1?
- The maximum input voltage for SI8429DB-T1-E1 is 35V.
What is the typical propagation delay of SI8429DB-T1-E1?
- The typical propagation delay of SI8429DB-T1-E1 is 40ns.
Can SI8429DB-T1-E1 be used in high-speed digital isolator applications?
- Yes, SI8429DB-T1-E1 can be used in high-speed digital isolator applications due to its fast propagation delay and high data rate capability.
What is the maximum data rate supported by SI8429DB-T1-E1?
- SI8429DB-T1-E1 supports a maximum data rate of 150 Mbps.
Does SI8429DB-T1-E1 have built-in isolation?
- Yes, SI8429DB-T1-E1 has built-in isolation with a working voltage of 5600Vrms.
Is SI8429DB-T1-E1 suitable for industrial control and automation applications?
- Yes, SI8429DB-T1-E1 is suitable for industrial control and automation applications due to its high noise immunity and robustness.
What is the operating temperature range of SI8429DB-T1-E1?
- The operating temperature range of SI8429DB-T1-E1 is -40°C to 125°C.
Can SI8429DB-T1-E1 be used in motor drive and power inverter systems?
- Yes, SI8429DB-T1-E1 can be used in motor drive and power inverter systems due to its high voltage capability and fast response time.
Does SI8429DB-T1-E1 support bidirectional communication?
- Yes, SI8429DB-T1-E1 supports bidirectional communication, making it suitable for half-duplex and full-duplex applications.
What are the package dimensions of SI8429DB-T1-E1?
- SI8429DB-T1-E1 is available in a compact SOIC-16 package with dimensions of 10.3mm x 7.5mm.